Top 10 Best 120 Mm Rgb Pc Fans 2023 – Complete Buying Guide

Features :

• 【Premium Cooling Fan】Increasing more colorful in the user’s case by add the awesome RGB light in the FX-120 RGB Case Fan. Each 120MM rgb fan comes with 6 high-brightness LED lamp beads. Three 120MM fans provide excellent heat dissipation, add fun and bring you better gaming experience.
• 【Special Threaded Blade Design】The special 9-blade special thread design can minimize resistance and further improve fan performance. The output air flow reaches 31.68CFM under the standard of 1200 rpm, which effectively optimizes the air duct of the chassis and helps dust removal.
• 【Effective Shock Absorption Design】FX-120 case fan is surrounded by 4 soft silicone cushions which widely decreased the noise from fan vibration under high speeds.Highly optimised low-noise design provides outstanding quietness of operation. The maximum noise of the fan is only 18dBA. Quiet sound like falling leaves. The noise reduction technology and heat dissipation performance are greatly help customers to build a perfect case cooling system.
• 【High Performance Hydraulic Bearings】FX-120 fan adopts hydraulic bearing technology. High-performance sleeve bearing with high-performance and lasting bearing technology. It can absorb and conserve lubricating oil. Reducing wear and noise effectively. The bearing life can reach more than 40,000 hours.
• 【Simple Installation】RGB case fan is compatible with all types of chassis and easy to install. Humanized power supply interface design, two interfaces of small 3PIN on the motherboard and 4PIN for power supply D-type Port. Please do not connect 4PIN and 3PIN at the same time to avoid short circuit! Tips: FX-120 Case fan does not have ARGB function, and there is no remote control and controller. Please do not connect them to the controller.

Features :

• Easy to install: 12V RGB interface connected by daisy chain to reduce the difficulty of cable management (PLEASE confirm whether the motherboard has 4pin rgb interface)
• Quiet operation: sleeve bearing and fluid dynamic bearing (21.5 dBA) run quietly, meeting the noise standard of the studio
• Bright RGB: full-spectrum RGB lighting, to meet the individual needs of most players, and you can enjoy a distinctive vision after powering on
• Rapid cooling: The arc surface of the fan frame is guided, which can produce good airflow and cooling effect, efficient ventilation, and large-capacity heat dissipation.

Features :

• 【PWM fan】The PWM fan control allows for dynamic speed adjustment between 700 rpm to 1, 500 rpm, minimizing noise or maximizing airflow. Max. Air Flow: 62CFM
• 【Addressable RGB Lighting】The Addressable RGB lighting is adjustable to match your PC build.
• 【RGB Sync】The addressable RGB lighting can sync with the motherboard via the 5V 3PIN connector.
• 【Compatibility】The standard 120X120X25mm cooling fan is designed to match the CPU cooler, CPU water cooler, pc case, etc.
• 【Superior Build Quality】High quality fan blades and frame built-in extremely even light diffuser. The 120mm fan Blade engineered for Low-Noise operation without sacrificing performance

Features :

• Astonishing lighting effects-Tri-aperture inside and outside luminous light effect,Give out an impact visual light effect.
• Sync RGB lighting via motherboard: Support M/B 3 pin RGB Header (5V, Di, -, G),Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB
• With EZDIY-FAB Fan Hub X and 21-key remote -You can instantly adjusting LED back-light effects, colors, brightness and Fan speed.NOTE：Maximum Current-5A, HUB-X ONLY Supports 6 fans in solid WHITE color setting. Supports 10 fans in RAINBOW or other color settings.
• Equipped with 8 anti-vibration rubber pads to effectively prevent vibration during operation, greatly reducing noise and improving efficiency.
• Self-lubricated Bearing and friction-reducied substance lowers operation noise and enhance thermal efficiency

Features :

• Soft and bright visual experience: The Conisy LED PC Case Fan Shows Horgeous and Vivid Visual Effect.which will make your PC case cooler and stand your own personality.
• Wide Compatibility: Standard 120mm size,Compatible with all types of computer case,Suitable for PC air cooling fan and water cooling radiator.
• Silent Cooling and Long Service Life: Advanced Hydraulic Bearing for reliable, quiet operation.service life of more than 20,000 hours.
• Easy to install, use and maintain: Dual interface design, Use 3Pin connector to mainboard fan interface,or Use 4Pin connector to Power molex.
• Delivery: 2Pcs 120mm PC Fan.The quality assurance: If you have any questions, please contact us.product quality problems, 90 days replacement. We will do our utmost to quickly and efficiently resolve your issue.

Features :

• Astonishing lighting effects-Tri-aperture inside and outside luminous light effect in White color frame,Give out an impact visual light effect.
• Sync RGB lighting via motherboard: Support M/B 3 pin RGB Header (5V, Di, -, G),Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB
• With EZDIY-FAB Fan Hub X and 21-key remote -You can instantly adjusting LED back-light effects, colors, brightness and Fan speed.NOTE：Maximum Current-5A HUB-X ONLY Supports 6 fans connected.
• Equipped with 8 anti-vibration rubber pads to effectively prevent vibration during operation, greatly reducing noise and improving efficiency.
• Self-lubricated Bearing and friction-reducied substance lowers operation noise and enhance thermal efficiency. Fan speed only controlled by remote, does not support PWM motherboard control.

Features :

• 16 independent RGB LEDs in every fan, split between two separate light loops.Dynamically control fan speed from 360 RPM to 2,200 RPM to minimize noise or maximize airflow.PACKAGE CONTENTS : 1 LL120 RGB 120mm Dual Light Loop RGB LED PWM Fan, x4 Fan Mounting Screws
• This product is intended as an expansion of the LL120 RGB LED 3 fan kit with lighting Node PRO. The RGB functionality of this product requires a RGB lighting hub and lighting Node PRO
• Pwm fan control allows for dynamic speed adjustment between 600 RPM to 1, 500 RPM, minimizing noise or maximizing airflow. Compatible with CORSAIR iCUE
• 120mm fan blade engineered for Low-Noise operation without sacrificing performance
• Sound level: 24. 8 dBA. Bearing Type : Hydraulic
• Dynamically control fan speed from 360 RPM to 2,200 RPM to minimize noise or maximize airflow.
• PACKAGE CONTENTS : 1 LL120 RGB 120mm Dual Light Loop RGB LED PWM Fan, x4 Fan Mounting Screws

Features :

• Addressable RGB: 120mm fan with addressable sync for vivid and colorful RGB LED effects
• Double Ring LEDs: each fan has double LED rings on the front and back so your vivid RGB colors are visible from two angles
• Silent Operation: Rugged plastic housing with hydraulic bearings and installed anti-vibration rubber pads for smooth and silent operation
• Max fan speed: 1,500 RPM, Max Airflow: 34.34 CFM, Max Noise: 25.6 dB(A)
• Has 3-pin power connector and 3-pin ARGB connector. Gigabyte motherboard converter included.

Features :

• Duo-Ring Addressable RGB Lighting 24 Individually Controlled ARGB LEDs for a stunning visual effect
• Performance Engineered Hybrid Static Pressure blade design to tackle resistances in CPU liquid radiator, low-noise or mesh chassis ventilation while boosting overall airflow
• Silent Cooling Technology Noise Reduction Technology and Sound Absorbing Materials for a quieter and longer lifespan cooling solution
• PWM Fan Controly, Dynamic speed adjustment between 650 rpm to 1 800 rpm minimizing noise or maximizing air flow
• Certified Compatibility Compatible with most of Addressable RGB capable motherboards Aura Mystic Light and Polychome Sync
• Wired ARGB controller Color can be adjusted with just a touch of a button without the need for software
• Included 3 MF120 Halo 120mm fans, plus Wired ARGB controller

Features :

• 1.RGB Case Fan: Unlimited color transformation, One key to change RGB color.
• 2.High Airflow: 120 mm fan tuned for high-airflow and large volume cooling.
• 3.Super Quiet: Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency.
• 4.6Pin interface to provides RGB FAN safe and reliable power output,Make the lights appear bright and colorful.
• 5.Two Way Installation:Easy for installation.You can either blow warm air out of the case or draw cool air into your case.