The 10 Best 3 Pin Fan Controller Hubs 2023 – Ultimate Buying Guide

Features :

• Thermalright is a Taiwanese brand with more than 20 years of development. It has a certain popularity in domestic and foreign markets and has a decisive influence in the player market. R & D product lines include: CPU air-cooled radiator, chassis cooling fan, thermal conductive silicone pad, thermal conductive silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities.
• Built in strong double-sided sticker, fixed on the chassis with double-sided sticker. SATA power line direct transmission, more concise and more efficient. Maintain stable output under high load.
• This fan hub supports the installation of 10 groups of ARGB light interfaces to easily manage wiring. Strong paste installation mode, convenient SATA power line direct transmission, and safety is guaranteed.
• Support fan speed reading and PWM Fan regulation. (due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized).
• Small body, large capacity. Multi line management and control, keep the cables neat, support ARGB fan, ARGB light bar, etc., and synchronize the light efficiency of 5V 3pin interface equipment. (Note: the + 12V 4Pin RGB interface device is not supported! Do not insert! Please pay attention to the arrow marked on the ARGB equipment plug and insert it in the direction of 5V. If the insertion direction is wrong, there is a risk of damaging the equipment.)

Features :

• ✪ SATA Cooling Fan Splitter Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.
• ✪ Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.
• ✪ Built-in double-sided adhesive: This compact HUB easily fits inside your pc case. It can be used to fix the hub in the chassis.
• ✪ 8 way without speed measurement and PWM function, you can manually adjust the gear position, start the fan at full speed (LOW) or low speed (LOW), or turn off the fan.
• ✪ EASY INSTALLATION:It is very easy to setup. Connect your RGB items to the hub, connect the included cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power.

Features :

• Thermalright is a Taiwan brand with more than 20 years of development. It has a certain popularity in domestic and foreign markets and has a decisive influence in the player market. R & D product lines include: CPU air-cooled radiator, chassis cooling fan, thermal conductive silicone pad, thermal conductive silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities.
• This fan hub supports the installation of 8 groups of ARGB fans, making it easy to manage wiring. Strong paste installation mode, convenient SATA power line direct transmission, and safety is guaranteed.
• Built in strong double-sided sticker, fixed on the chassis with double-sided sticker. SATA power line direct transmission, more concise and more efficient. Maintain stable output under high load.
• Support fan speed reading and PWM Fan regulation. (due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized).
• Small body, large capacity. Multi line management and control, keep the cables neat, support ARGB fan, ARGB light bar, etc., and synchronize the light efficiency of 5V 3pin interface equipment. (Note: the + 12V 4Pin RGB interface device is not supported! Do not insert! Please pay attention to the arrow marked on the ARGB equipment plug and insert it in the direction of 5V. If the insertion direction is wrong, there is a risk of damaging the equipment.)

Features :

• Type: Large 4 Pin IDE Molex 1 to 8 Way Cooling Fan Splitter Hub
• 3 Level Speed Controller: Low Speed, High Speed, and Power OFF.
• Input: Large 4 Pin IDE power supply interface port, connect to your PC computer.
• Output: 8 way fan interface ports, fits for 12V 3pin / 4pin cooling fan, can be used as speed controller or fan splitter hub.
• Installation: With thickened 3M glue on the PCB back, you can fix it on your PC case firmly.

Features :

• Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first.
• In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
• There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
• Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control.
• If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.

Features :

• ✅【FUNCTION】:This fan hub accurately controls fan speed, can be started at full (HIGH) or Low (LOW) speed and Power OFF
• ✅【INPUT】: 4 Pin IDE MOLEX power supply interface port, connect to your PC computer.
• ✅【INSTALLATION】: With thickened double-sided adhesive on the PCB back, you can mount to the PC case or any flat place
• ✅【APPLICATION】:Fit for 12V 3 pin / 4 pin cooling fan, 8 way total electric current ≤ 2A, can be used as speed controller or fan splitter hub.
• ✅【PACKAGE CONTENT】:1 x 12V Fan Hub IDE Molex 1 to 8 Way Splitter, 2 x Fan Splitter Cable 1 to 3 Way, 10 x Wire Ties

Features :

• Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
• In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
• For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
• There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
• RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the “source” fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.

Features :

• Support control to DS B Series Rainbow Fans (5V 3-PIN ARGB Fans)
• Input SATA connector, Support All of the PSU models
• Support have 3Pin-ADD-Header Rainbow LED strip or Fans, Can’t connect to motherboard
• RF Remote Controller, Control is more free, 215 Dynamic Light Modes and 4 Static Light Colours
• Risk-free Purchase: If you have any questions, please contact us immediately, DS LEDdess will reply within 24 hours

Features :

• The Chassis Fan Hub Expand Fan Interfaces – Expand 4-pin 3-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 8 channel fans.
• Chassis Fan Hub – In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining 2-8 fan interfaces have the PWM function, but no speed signal.
• Power Supply – It can be directly powered by the power supply, the dual SATA interface is connected to the power supply, and all fans are powered through the SATA interface. It provide a better power supply solution for PC computer case internal motherboard cooling fans.
• Other Accessories – Equipped with 8pcs self-locking nylon cable ties, you can use to fix the PCB and organize the bundled and installed fan lines. Equipped with a 2Pin to 4Pin PWM fan control cable: 2Pin is terminated to the controller 2-pin socket, and 4Pin is terminated to the CPU PWM 4-pin fan socket of the computer motherboard.
• Easy To Install – There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also 3 fixing screw hole in the PCB to facilitate fixing to a part of the chassis.

Features :

• Manages Multiple Fans – If your motherboard lacks fan interfaces, our PWM fan hub is the neat and tidy way to expand. The 12V fan controller accurately controls 4-pin fan speed from a single case input
• Cooling when you need it – Quiet when you don’t. The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps. The PWM fan hub then matches the power level for the other ports
• Easy Installation – Just plug the molex fan controller into the motherboard and connect to the PSU. Double-sided adhesive mounts the PC fan hub to any flat surface and the screw hole allows it to be fixed to the chassis
• No frills, all function – Strong wire connections and clean sleeving are part of our simple, cost effective design. Take care during installation to avoid bending the pins and capacitor
• Money-back Guarantee – Backed by a manufacturer’s warranty, if your fan hub falls short of your expectations for any reason, contact us for a full refund