The 10 Best Connector Multiple Pc Fans 2023 – Complete Review & Buying Guide

Features :

• 👍【 SPECIFICATION】Size:75.6×48.7 mm/2.9×1.9 inches (L*W);Max Current: Not exceed 1A for 1 way, not exceed 10A for total 10 ways; Package Content: 1 Set(1x Red Delicated CPU Fan Interface, 9x Black Conventional PWM Fan Interface,1x 4 Pin IDE Power Interface and 1x PWM Interface for Connecting to CPU FAN Interface On Motherboard)
• 👍【 HIGH FUNCTION】The connected 4-pin fan can be adjusted at the same time, but only when connected to the PWM interface can support speed measurement, and at the same time, the speed of the fan can be adjusted through temperature control. The 3-pin fan does not have a PWM function, so its operating speed cannot be adjusted.
• 👍【 DESIGN】The red interface is connected to the CPU fan, and the black interface is connected to the PWM fan interface.Be careful not to connect them incorrectly.(NOTE:Since the motherboard can only receive one speed signal, the remaining 9 conventional fan interfaces have PWM function, but no speed signal. )
• 👍【APPLICATION】 Applicable to 12V, 4-pin PWM fan or 3-pin fan on the motherboard, the purpose is to expand the 4-pin fan 4-pin interface, and to solve the shortcomings of the lack of motherboard fan interface.
• 👍【INSTALLION】The installation method of chassis fan hub cpu cooling is simple. The high-viscosity double-sided tape is attached to the back of the hub PCB. You can paste it in a flat and suitable position.

Features :

• Excellent 1 to 5 splitter 5 way 4-pin PWM fan power supply extension cable cord, better power supply for PC computer case internal motherboard fans.
• Widely Compatible: support 4-pin and 3-pin fans cable, the 1 to 5 splitter 5 way fan power extension cable compatible with 4-pin and 3-pin PC case motherboard fans.
• Black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean & tidy.
• Plug-n-Play, easy to plug; 5 way 4-pin male connector jack fan hub cable.
• The extension cable offers greater flexibility between motherboard and CPU cooling fans.

Features :

• Manages Multiple Fans – If your motherboard lacks fan interfaces, our PWM fan hub is the neat and tidy way to expand. The 12V fan controller accurately controls 4-pin fan speed from a single case input
• Cooling when you need it – Quiet when you don’t. The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps. The PWM fan hub then matches the power level for the other ports
• Easy Installation – Just plug the molex fan controller into the motherboard and connect to the PSU. Double-sided adhesive mounts the PC fan hub to any flat surface and the screw hole allows it to be fixed to the chassis
• No frills, all function – Strong wire connections and clean sleeving are part of our simple, cost effective design. Take care during installation to avoid bending the pins and capacitor
• Money-back Guarantee – Backed by a manufacturer’s warranty, if your fan hub falls short of your expectations for any reason, contact us for a full refund

Features :

• motherboard 4-pin interface, PWM speed control, can be used for multiple cooling fans, expansion and expansion motherboard 4 pin interface, suitable for CPU or computer chassis fan.
• fans can be used for 12V DC, or for fixed Molex voltage operation of 5V DC (only 2-pin connector required) cable compatible with standard 3-pin fan
• power supplies for four 3-pin or 4-pin (PWM connector) PC chassis fans with 4-pin Molex connectors
• fan splitter cable provides more fans and increases airflow inside the computer case
• adapter cable length 16 cm / 6.5 inches. (2 pieces) This product has been upgraded and updated. The performance of the new product is more stable, the connector is upgraded, the old connector, the new connector, and universal! The length of the new products has been shortened. New line length: 12.5 cm/5 inches

Features :

• Manages Multiple Fans – Our PWM fan cable expands one motherboard PWM fan header to support up to five internal cooling fans at the same time to reduce the load on the motherboard
• Easy Installation – Simply plug the PWM case fan splitter into the motherboard and attach the other end to the chassis with the double-sided adhesive
• Flexible Use – The PWM 5 way PC fan splitter can be used as a 4 pin fan splitter for most motherboard cooling fans. Our pc fan extension cable offers greater flexibility between motherboard and CPU cooling fans
• Designed for Performance – The connector types of the PWM fan extension cable includes 1 TX4 4-pin Female, 1 TX4 4-pin Male for CPU fan (including Detect tach pin), and 4 TX4 4-pin Male for case fan
• Money-back Guarantee – Backed by our manufacturer’s warranty, if your fan splitter extension cable falls short of your expectations for any reason, contact us for a full refund

Features :

• 【Intelligent Speed Control】5 pcs 120mm full function PWM fans. The intelligent temperature controls the speed at 1000~1800±10% RPM, so the fan speed can be controlled and keep the fans quiet. There’s switch fan speed control by motherboard’s PWM signal. These fans are 4pin 5v ARGB connector that connect with RGB control box one by one. Please connect the fan 4Pin PWM connector with 1-to-5 strip cable’s female port, do not connect it with motherboard.
• 【Dual Light Loop Design – Controlled by RGB Remote Controller】Addressable RGB LEDs can be controlled by RGB remote controller – 12 lighting modes, 8 different colors and multiple RGB light speeds, provide colorful streamer lighting effects. Double-sided ring ARGB glare effect design, creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch fan hub’s RGB signal to motherboard 5V ARGB / 12V RGB port by remote.
• 【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 31.4dBA.
• 【Top Bearing Technology】Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs. Wireless RGB controller, more advanced wireless control dimming technology than infrared, you can still switch the light mode without aligning the light source.
• 【Sync with Motherboard’s RGB/ARGB Port】12V RGB sync and 5V ARGB sync connector, 4 pin PWM power connector. Please connect the fan ARGB connector with control box one by one. To avoid making reverse connector, please follow the silk mark instruction strictly when you insert the connector to the control box. Suitable for liquid cooler and support 120/240/360mm radiators. (CPU Cooler/Computer Case/GPU etc)

Features :

• Controls Lutron Caséta wireless dimmers and plug-in lamp dimmers (sold separately)
• Turns lights on/off as well as brighten and darken them
• Adjust lights from anywhere in the room
• Coordinating tabletop pedestal and wall plate sold separately
• 10-year battery life (battery included)
• Includes (1) Pico remote control; coordinating accessories sold separately

Features :

• Ventilation Holes Design & Smart Chip System: Oversized venting on both sides of the switch stand, so don’t worry about ventilation holes will be blocked and affect equipment cooling. Built in smart original chip, having Short-circuit Protection, Over Power Protection, Recovery Protection and Overheating Protection. Our switch docking station have professional technical support, after repeated testing, with the highest quality assurance!
• Replacement For Official Nintendo Switch Dock: This dock is only 82.5g(2.9oz), which is much more portable and lightweight than official switch dock, ideal replacement for taking out anywhere. Same amount of ports for USB controllers and HDMI ports for TV.(IF YOU WANT THE SWITCH DOCK WITH HDMI CABLE, PLEASE SEARCH THE ASIN B08R3T1Y5Z ON AMAZON SEARCH BOX. THE HMDI CABLE IS INCLUDED ON THAT LISTING PAGE.)
• Never Scratch Your Switch Screen & Overheat: The official dock is a RISK for scratching the screen even with a screen protector, but now WEGWANG solve this problem with unique design. The console sits on top of the unit instead of sliding into the Switch docking station avoiding overheat.
• One-touch Display Switching: Switch with one-touch button between the host and the TV display interface with 2K HDMI port. Note: To play and charge at the same time, you need a 15V/2.6A power supply (NOT INCLUDED). Three angles allows you to play your Nintendo Switch at the best viewing angle for different environments.
• Won’t Sliding Around: The anti-slip base design prevents it from sliding around or falling over by accident. WHAT YOU GET: One WEGWANG Nintendo Switch Dock Station, One Package Box. And WEGWANG provides 1 year Warranty, 1 month money return guarantee and 24H x 7 email support.

Features :

• Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.
• Widely Compatible: The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.
• Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.
• Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.
• Package contents: 1 black 15.7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug.

Features :

• ✔MOST EFFICIENT SATA TO FAN ADAPTER IN 2019✔ Managing multiple fans from a single case input has become easier for you now. If your motherboard lacks fan interfaces, use this neat & tidy way to add fans & expand fan interfaces designed for 12 V 4-pin fan. This PWM hub SATA accurately controls fan speed, you can slow down & speed up the fans up to the maximum speed. You need to connect the SATA & the 4 pin at the same time to run multiple fans.
• ✔PWM FAN CONTROLLER TEMPERATURE CONTROL✔ The CPU Port (red port), would be the only port that can be controlled by the operating system. The other 9 black fan ports CAN NOT be adjusted in speed and will copy the power level of what the red port is at. Please note 4 Pin fan speed can be adjusted by temperature control as well. 3 Pin fans may also be used but have no PWM function and will stay at it’s fixed speed after inserting.
• ✔INSTALLATION & CONFIGURATION✔ Simple installation & easy configuration, this fan splitter will work even if only connected to the PSU with SATA connector. You just plug the board into the CPU fan motherboard connection & then SATA for power. It has EVA double-sided adhesive tape at the back of the hub to mount to the case or any flat place. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
• ✔STEP BY STEP SET-UP✔ You will receive 1 hub & 1 PWM connector in your package. The PWM interface is connected to CPU fan interface on motherboard by PWM cable & the red interface is dedicated for CPU fan. Connect 1 fan to the red port on fan hub then connect remaining fans. You then need to connect the fan hub’s PWM cable to the motherboard. Connect the power supply SATA cable to fan hub before you attach/stick it on the chassis.
• ✔MONEY BACK PRODUCT WARRANTY✔ Our product is backed up by manufacturer’s warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. We will go an extra mile to redress the situation at hand.