Top 10 Best Fan Controller Splitters 2023 – Complete Buying Guide

Features :

• 10-Port Fan Hub: Supports 10 PWM 4 pin Fans at the same time. Compact design can save space and make the wire more tidy.
• PWM Function: Each port has its own PWM function and the fan speed can be adjusted at the same time. (Only the speed of the red port can be identified by the system.)
• Stable SATA Power Input: Simple and stable. Only one SATA connection to the system.
• Easy to install: Double-sided adhesive for easy installation and more stable standing in the surface.

Features :

• 【1 to 8 PWM Fan Hub】PC fan controller can be connected to 8 pcs 3pin/4pin fans to solve the shortage of mainboard interface.It provide a better power supply solution for PC computer case internal motherboard cooling fans.
• 【Function】Power interface 6Pin supplies.through this hub, the governor can supply power to up to 8 fans, and the rotating potentiometer can adjust the speed of 8 PWM fans at the same time.(Note:The fan base supports 3Pin and 4Pin fans, and the speed of these three fans can be adjusted.)
• 【Easy To Use】Chassis Fan Pressure Regulating Governor. No Drive, plug-and-play.Can be directly supplied by 12V power, which can reduce the load pressure of the mainboard.
• 【Widely Compatible】 For both 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 17A to avoid damage to the governor.
• 【Save Space】8 Way Splitter 12V Speed Controller.The rotary switch with 30cm cable can be installed in any position of the PC case.with sided tape, can fix the governor firmly inside the chassis.

Features :

• Type: Large 4 Pin IDE Molex 1 to 8 Way Cooling Fan Splitter Hub
• 3 Level Speed Controller: Low Speed, High Speed, and Power OFF.
• Input: Large 4 Pin IDE power supply interface port, connect to your PC computer.
• Output: 8 way fan interface ports, fits for 12V 3pin / 4pin cooling fan, can be used as speed controller or fan splitter hub.
• Installation: With thickened 3M glue on the PCB back, you can fix it on your PC case firmly.

Features :

• [Expand Fan Interfaces] – Excellent 1 to 8 splitter 8 way 4-pin and 3-pin PWM fan power supply extension hub, it provide a better power supply solution for PC computer case internal motherboard cooling fans.
• [Function] – Through this hub, the governor can supply power to up to 8 fans, and the rotating potentiometer can adjust the speed of 8 PWM fans at the same time.
• [Widely Compatible] – For both 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 17A to avoid damage to the governor.
• [High Performance] – The high-performance fully black circuit board is adopted, the hub is small in size and convenient to use, the material is strong and the resistance is small, which does not affect the fan performance.
• [Glue Fixation] – The thickened 3M glue is used to fix it, which has strong adhesion, easily fits inside your pc case and can firmly fix the fan hub inside the chassis.

Features :

• 【1 to 4 PWM Fan Hub】PC fan controller can be connected to 4pcs 2pin，3pin/4pin fans to solve the shortage of mainboard interface.It provide a better power supply solution for PC computer case internal motherboard cooling fans.
• 【Function】Power interface 6Pin supplies.The governor can supply power to up to 4 fans, and the rotary potentiometer can adjust the speed of up to 4 fans at the same time.(Note:The fan base supports 2Pin， 3Pin and 4Pin fans, and the speed of these three fans can be adjusted.)
• 【Easy To Use】Chassis Fan Pressure Regulating Governor. No Drive, plug-and-play.Can be directly supplied by 12V power, which can reduce the load pressure of the mainboard.
• 【Widely Compatible】 For 2 Pin, 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 7A to avoid damage to the governor.
• 【Save Space】4 Way Splitter 12V Speed Controller.The rotary switch with 30cm cable can be installed in any position of the PC case.with sided tape, can fix the governor firmly inside the chassis.

Features :

• 【Manage Multiple Fans】If your motherboard lacks fan interfaces, our PWM fan hub is the neat and tidy way to expand. The 12V fan controller accurately controls 3 pin/4 pin fan speed from a single case input.
• 【Power Supply and Temperature Control】It can be directly powered by the power supply, which can reduce the load pressure of the motherboard. The CPU fan 4-pin interface connected to the motherboard is responsible for speed measurement and speed regulation. Power Supply and Temperature Control can be carried out at the same time.
• 【8-Way Chassis Fan Hub】The CPU fan is connected to the RED port of the controller; the fan installed can be connected to FAN 2-8; the motherboard detects the speed of the CPU fan and adjusts the speed of all fans as well. So FAN 2-8 does not have the function of feedback speed, only PWM speed regulation function.
• 【Easy To Install】Mini and compact, which effectively saves your space, makes cable management easier, and the inside of the chassis is tidy. The adhesive on the back can be used to fix the hub in the chassis, tool-free installation, also 3 fixing screw hole in the PCB to facilitate fixing to a part of the chassis, and not easy to drop.
• 【Other Accessories】Equipped with 8pcs self-locking nylon cable ties, you can use to fix the PCB and organize the bundled and installed fan lines. Equipped with a 2Pin to 4Pin PWM fan control cable: 2Pin is terminated to the controller 2-pin socket, and 4Pin is terminated to the CPU PWM 4-pin fan socket of the computer motherboard.

Features :

• This is ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB (5V 3pin) plugs and PWM (12V 4pin) plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color).
• This CPU Cooling SATA Hub is powered by SATA 15PIN, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. The motherboard has no power supply burden and can maintain a stable output even at full load.
• The ARGB of this hub is 5V 3-pin. This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming. Only compatible with 3pin 5V addressable RGB headers or controllers, don’t connect to 12V RGB components, otherwise it might burn out.
• The black hub is perfectly integrated with chassis. Mini and compact, which effectively saves your space, makes cable management easier, and the inside of the chassis is tidy. The adhesive on the back can be used to fix the hub in the chassis, tool-free installation, and not easy to drop.
• The PWM ARGB hub is equipped with two connecting cables. Both length of the wires is 53 cm. The red port on the hub is a professional port for the CPU fan. Gold-plated pins, solid materials, strong and durable.

Features :

• Toptekits Computer/pc Case Fan controller Power Cable 1 Female to 10 Male 4Pin Fan Hub Splitter Cable for 3Pin&4Pin PWM Cooling Fan
• IDE Molex 1 to 10 way cooling fan splitter hub. Designed for 12V 4-Pin fan, support simultaneous starting of 10 channel 4-Pin fans, solving the problem of shortage of motherboard.
• Widely used for PC computer water cooling system. Support PWM function fan automatic speed regulation. PWM interface is connected to CPU FAN interface on motherboard by PWM cable.
• The orange interface is the dedicated interface for CPU fan, these black interface are conventional PWM fan interface. EVA double-sided adhesive can be used to fix the hub in the chassis.
• Package includes: 1X Toptekits 4Pin interface 1 To 10 Way PCB Adapter ,1X Toptekits SATA interface 1 to 10 way PCB adapter

Features :

• Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first.
• In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
• There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
• Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control.
• If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.

Features :

• The Chassis Fan Hub Expand Fan Interfaces – Expand 4-pin 3-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 8 channel fans.
• Chassis Fan Hub – In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining 2-8 fan interfaces have the PWM function, but no speed signal.
• Power Supply – It can be directly powered by the power supply, the dual SATA interface is connected to the power supply, and all fans are powered through the SATA interface. It provide a better power supply solution for PC computer case internal motherboard cooling fans.
• Other Accessories – Equipped with 8pcs self-locking nylon cable ties, you can use to fix the PCB and organize the bundled and installed fan lines. Equipped with a 2Pin to 4Pin PWM fan control cable: 2Pin is terminated to the controller 2-pin socket, and 4Pin is terminated to the CPU PWM 4-pin fan socket of the computer motherboard.
• Easy To Install – There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also 3 fixing screw hole in the PCB to facilitate fixing to a part of the chassis.