The 10 Best Ultragauge Mounts 2023- Reviews And Buying Guide

Features :

• Programmable 3-In-1 Automotive Trip Computer, Diagnostic Scan Tool, And Up To 37 Digital Gauges In One (Vehicle Dependent)
• Watch Fuel Consumption, Cost-Per-Mile, Coolant Temperature, Engine Speed, Horsepower, And Much More In Real Time. Simple 5-button operation allows you to quickly and easily access the powerful features of the ScanGauge.
• Works On All 1996 Or Newer Obdii Cars, Including Gas, Diesel, Propane And Hybrid Vehicles
• Checks For Diagnostic Trouble Codes (Dtcs), Clears The Codes, And Can Turn Off The “Check Engine” Light
• No Batteries Required : The single connection to the diagnostic connector under the dashboard is all that is needed.

Features :

• 2 KINDS INSTALL—Install on A-Pillar trim or put on dashboard, more easy for use. Simply displays directly to you at whatever angle you set it up is possible, no need to make effort or look down that would create distractions, best assistant to help ensure your driving safety.
• MORE EASY—Easy to install, set up is no more complex than connecting to USB power. It takes perhaps half a mile to lock onto a satellite and do its housekeeping before speed is displayed.
• 8 DISPLAY INTERFACES—Different interface can be freely switched. Read full car data stream, display vehicle ECU data.
• MULTI-FUNCTION—OBD+GPS dual system with function display, such as speed, clock, RPM, voltage, water temperature, etc. please note: the default mode is OBD2 mode.
• QUALITY & SERVICE—CE FCC RoHS listed. Any querry, feel free to contact us, we will reply and help you solve problem ASAP.

Features :

• HOURS —- Monitor the total run time(TOT) and single working hours(JOB) of gas engine, with ability to program previous hours(INT) for an replacement;Accomplish maintenance at recommend intervals to determine the due time(SVC);TOT & JOB hours range:0-999,99 hours;SVC timer range:5-1000 hours.
• RPM —– Display the real-time RPM readout by vairous engine firing patterns setting to adjust engine idle speed; Alert channel for revolution exceed reminder;Viewable highest revolution since the engine started; RPM measurement range: 0-25000RPM, Alert range: 100-25000RPM.
• TEMP —- Keep eyes on engine current and maximum temperature at all the times by probe senor(The induction probe cannot be bent to avoid breakage); Remind the temperature exceed for engine maintenance; Easy to switch between Celsius and Fahrenheit;Temp measurement & alert range: -20°C~+300°C(-4°F~+572°F)
• BACKLIGHTS —- Default green backlight will help to use it at night or dim place, you can set the backlight mode by always-on, OFF and automatical mode(OFF default, button to wake up) as request;Red backlight will remind the engine RPM or TEMP exceed.
• OTHERS —- Easy to mount it on proper position by stick-on, screw-on and extra bracket(not include), one-wire wrapping of spark plug for signal detect (68.8inches, workable if shorten or extend) to work right away;Favorable water and shock resistence; Battery capacity will be kept in good condition with insulation sheet during transport, it is repalceable;LCD shutdown also can extend the lifetime in vacant time;Reliable technical support and after-sales service(2 years).

Features :

• [9Pcs Strong Very High Bond Sticky Adhesive] – AZXYI offers 9 super sticky adhesive, double side self sticky car adhesive. Rounded rectangle adhesive pads with pressure-sensitive VHB adhesive pads. The Size compatible with most magnetic dashboard mount base, Size: The length is 1.97″, the width is 1.18″, and the thickness is 0.03″.
• 【Easy to Use】To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard.
• [Suitable for stick on many flat hard surface] – Can be used in home bathroom mirror, bed post, wall, locker, refrigerator, office, driving personnel and other related equipment replace. It is a strong sticky adhesive replacement if your magnet dashboard car holder or phone dock lost its stickness. These magnetic dashboard mount base replacement sticky adhesive compatible with Wizgear, Scosche, Bextrix, Scosche, Trainium.
• [Very High Bond & Durability] – These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various substrates/surfaces, stable even in bumpy roads and actually builds strength over time. These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
• [Tips and Tricks] – These adhesives perform flawlessly when being applied with steady pressure on a clean surface. That means no wax, dirt or porous surfaces and applying steady pressure for a period of time – not just stuck on for 3 seconds. Second, they need time to cure. They will cure about 50% in 20 minutes – but need 2 days to be 100%.

Features :

• Tactile Live Production: easily control your favorite tools and platforms.
• 15 Customizable LCD Keys: instantly trigger unlimited actions with a tap.
• Multi Actions: tap once to launch multiple actions simultaneously or sequentially with time intervals.
• Smart Profiles: create unique key configurations for different apps, and switch between them on the fly.
• Powerful Integrations: Elgato 4KCU, OBS, Twitch, YouTube, Twitter, Discord, Spotify, Philips Hue, vMix, VoiceMod, and more.

Features :

• 【Easy Read】5.5 inch large screen, high-definition display, multi-color design makes the screen more abundant,help you read easier. Supports automatic and manual brightness adjustment mode which also use nano-technology to eliminate unwanted reflections and can make display information sharper.
• 【Advantage】Auto power on and off with vehicle started and shutdown, effective protection of the car battery; while retaining the manual switch mode, and more beneficial to control HUD.
• 【Mileage Measurement】This is a new function of this head up display,it helps to measure your drive miles,average fuel consumption, Driving time, Detect fault codes and eliminate fault codes.
• 【Multi-Function】The car head up display has multi-function display,such as speed, engine speed, water temperature, battery voltage, instantaneous fuel consumption,shift reminding,fatigue driving reminding, low voltage alarm, high temperature alarm, speed alarm, engine fault alarm, fault code elimination, free switching between kilometer and mile.
• 【Wide Compatibility】Suitable for the most of cars with OBD2 and EUOBD standard, plug and play.If you are not sure that your car model is suitable for this product,Please contact us!

Features :

• Provide a extra choice for fix the monitor on your vehicle.
• Brackets for car rear view /front view monitor fixed on windshield. Working Well under kind of road condition without fall off.
• Two hooking ways for the monitor of 7” display. Easy installation make you driving easy.
• Mainly used for backup camera system‘s 7 inch monitor.Super strong material quality mount and suction power.

Features :

• 5 inch fullcolor, high-resolution, swipe screen
• Multiple gauge screen layouts
• HDMI style plug for power and linking EAS accessories
• One-touch easy menu navigation
• Available for 1996 and newer vehicles equipped with an OBDII port

Features :

• 【6Pcs Adhesives Replacement】We offer 6pcs 80mm (3.15″) Circle Double-Sided Extra Strong Adhesive Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders. You can also attach mounting disk to car dash with these dashboard adhesives to get a smooth surface for your suction cup dashboard phone mount .
• 【Easy to Use】To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield.
• 【Compatible With Suction Cup Items】You can cut these windshield adhesives into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market. Suitable for Car Phone Mount Holder Bracket, GPS, Camera ,Wall holder, Dashboard Toys, Windshield,Tiles, Wall Pictures and more.
• 【Easy to Install】Provided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate. please wait 24 HOURS to use.
• 【Very High Bond & Easy to Remove】The adherence of these circular adhesive stickies pads is 40% stronger than the ordinary glue on the market. These adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.

Features :

• ALL IN ONE OBD2 GAUGES ➤ KW206 Car OBD2 HUD display is the combination of automotive trip computer gauge and diagnostic scan gauge. Not only it can display up to hundreds of real-time engine parameters in its digital 3.5’’ color screen like speedometer, RPM, water coolant temperature, fuel consumption, total mile … but also can read engine fault codes and turn off the check engine light.
• PROFESSIONAL OBD2 SCANNER ➤ the KW206 car hud is newly designed as an enhanced HUD display and car diagnostic scanner, it’s a smart OBD2 gauge for car owners to quickly read and erase DTC (engine fault codes) and check Live Data Stream which can help you to accurately identify the cause of your CHECK ENGINE LIGHT and perhaps fix it without going to see your dealer.
• SAFETY DRIVING HUD ➤ the KW206 is an upgraded version of car Head-Up Display with its high updating rate, warning systems and more. Accessing data directly from car computer and display it in a large digital 3.5in color LCD, avoid accident happening when you’re driving with head down. Besides, 4 parameters alarm including RPM, VSS Speed, ECT (Engine Coolant Temp), Voltage can be set to help you reducing over-speed risk and tickets, developing a good driving habit and safety.
• UNIVERSAL COMPATIBILITY ➤ Works on all 2003 or newer OBDII certified gas/diesel engine cars, SUVs, Light Trucks, including J1850/CAN/ EOBD protocols vehicles. Simply plug into car’s OBDII Port, it will get power on automatically and follow the on-screen instruction to go. On Top 4-buttons operation allows you quickly and easily access the powerful features of the KW206 Digital Meter Gauge.
• EXTRA FEATURES ➤ KONNWEI KW206 supports the unit switch from metric to imperial like KM-Mile, auto-adjust screen brightness, fast data transmission rate, 0-100 speed-up test. Also it supports lifetime software update to fix any possible issue; You can leave obd2 gauges stay in the car without unplugging, KW206 will automatically enter sleep mode when engine off, power on while detecting the ignition. Definitely it’s an essential OBD2 digital gauge for every car owner.